Product Overview

MaxSeal Custom Made Dog Doors - For Doors

The Best Pet Doors by Design

Single & Dual Flap Models Made to Order

High Performance Insulated Pet Doors

Our Custom MaxSeal Pet Doors are identical to the best selling MaxSeal Pet Doors for doors.
Our custom version allows customers to order a MaxSeal in 3 manners:

1. Based on an existing cut through a door
2. Based on a desired flap size
3. Based on an exterior frame dimension

Custom doors generally are made for two different reasons:to fit an existing opening in a door, or to certain size specifications, such as the opening being a certain size for a unique situation (Giant breeds, dogs with mobility issues etc).

Best Sealing - Best Insulating - Most Secure
Flaps are impact tested in conditions of -20 degrees Fahrenheit. Moore Pet has tested these doors in the harsh Minnesota winters and summers, we highly recommend this door.

Important Note: When having a door made to a rough cut opening in a door; it is recommended that your hole in the door is a minimum of 1/8' larger than the rough cut dimension chosen for the custom door.

Example 1: If the hole you are installing a pet door is 15" wide x 20" high, then you multiply 15x20=300 square inches. Look in the chart below to see what range 300 falls into for pricing. Important: your flap size will be 13"w x 18"h (there is a difference of 2" in width and height from rough-cut dimension to flap size).

Example 2: If you want a flap size of 15"wide x 20"high, then you would figure the rough-cut to be 17"w x 22" (minus 2" from each measurement because of the 2" difference between rough-cut and flap size). 17 x 22=374 square inches. Find 374 in the chart below for pricing.

Custom Door Calculator

Pricing for these custom doors is based on Rough Cut Dimensions
(width x height of your opening = Total sq. inches in chart below)

MaxSeal Custom Made Doors Helpful Information Security Boss Manufacturing LLC is dedicated to providing products that operate beyond expectations and provide the customer with long years of satisfaction. Our products are designed so that you can maintain your pet door indefinitely.
Print Instructions Custom Door	Click to View Frame Colors	Technical Specs Door Model
Custom Flap Information	Replacements & Accessories	Common Questions

Rough Cut Dimensions Square Inch Range (For pricing) Multiply width x height)	Single Flap Door Mount	Dual Flap Door Mount
0-69"	$218.79	$241.35
69-93"	$223.74	$249.99
93-141"	$262.99	$297.99
141-175"	$292.99	$342.99
175-215"	$337.99	$402.99
215-257"	$377.99	$422.99
257-309	$402.99	$447.99
309-350"	$447.99	$497.99
350-372"	$492.99	$582.99
372-527"	$552.99	$632.99
527-600"	$625.99	$675.99

MaxSeal
Custom Made Pet Doors

Made in USA

Custom pet doors can be made to fit an existing cut through a door or wall
as well as to a certain flap size.

Note: The flap size will always be approx. 2" less in width and height than the rough cut "hole" dimension.

See calculator above for exact measurements

Pricing is determined by the size of the cut through the wall or door;
width x height = Pricing Range

We also offer doors that are LARGER than shown on the above chart; please call us at 1-800-829-7876 for assistance.

Important Notice: Custom Made doors are built to the customer's specifications.
They are non-refundable & non-returnable.
These doors ARE covered under the manufacturer's warranty.

If you need a door in a specific time frame, please call us.

Note: Custom doors with Rough Cut Dimensions LARGER than 17.75"w x 33.75" h,
require a 10 day fabrication period.

The Minimum Rough Cut Dimension that these doors can be made to is 5.5" in width or height.

A specification / data sheet will be kept on file for reference with Moore Pet Supplies LLC & Security Boss Manufacturing LLC for any future replacement parts that may need to be ordered.